Philips CF-30FTSAZAM - Manual (Page 31)

7-10
7.1.18. Removing the Inverter PCB, TS PCB
and LCD Unit
1. Remove the 2 Screws.
2. Disconnect the 3 Cables from the 3 Connectors.
3. Remove the Inverter.
4. Disconnect the 2 Cables from the 2 Connectors.
(CN200,CN201)
5. Remove the TS PCB.
6. Remove the 2 Drop Holders.
7. Remove the LCD Unit.
Screws : DRQT26+E4FKL
7.1.19. Removing the Antenna PCB L and R
1. Remove the 4 Screws .
2. Remove the W-LAN ANT Cover L and R.
3. Remove the 2 Screws.
4. Remove the Antenna PCB L and R.
Screws : DRHM5054XA
LCD Unit
LCD Front Cabinet
Inverter PCB
TS PCB
LCD Drop Holder
LCD Drop
Holder
A
B
A
B
C
C
to Connector
(CN200)
Connector
(CN200)
Connector
(CN201)
LCD Rear Cabinet Ass'y
Antenna PCB R
Antenna PCB L
W-LAN ANT Cover R
W-LAN ANT Cover L