Philips Combi 14 PV 172 - Manual (Page 11)

11
In Chapter 2 you connected the TV Combi. Playing a
cassette is now very simple.
If you want to record something straight away, first
read Chapter 6.
1 Switch on the set or insert a cassette into the
cassette slot with the window facing upward.
2 Press the PLAY G playback button.
PLAY
20:00
1245
3 If you wish to interrupt playback, press the
STOP h button.
PAUSE 1
20:00
1245
4 If you wish to remove the cassette, press the
J button on the set.
Note:
* Some functions switch off automatically after a
while (e.g.: Pause, Still Picture, Scanning). This
helps to protect the cassette and prevent
unnecessary power consumption.
* With this set you can play back cassettes that
have been recorded on other videorecorder in
the NTSC standard.
* If you load a cassette with erase protection, the
TV combi starts the playback automatically.
* Remove the cassette before transporting the
TV Combi.
Fast wind and rewind
1 Stop the tape. Press the H (Rewind) or I
(Wind) button on your remote control. The tape is
wound at high speed.
WIND 1
20:00
1245
2 Press the PLAY G playback button as soon as
you have reached the required position on the
tape.
Picture scanning
You can select from various speeds for scanning
backwards or forwards.
1 Press the PLAY G playback button.
SCAN FORWARD 1
20:00
1245
2 Now press the H or I button as often as
necessary until you have reached the desired
speed.
The TV screen will show e.g. 'SCAN FORWARD' .
Note:
* The picture quality is affected during scanning.
You will notice this particularly with long play
(LP) recordings. The sound is turned off.
5. PLAYING A RECORDEDCASSETTE