Specifications, Vtr unit – Panasonic AJ-D410A User Manual
Page 44
44
Video system
[VTR UNIT]
Recording format:
DVCPRO format
Sampling frequency
Y:
13.5 MHz
P
B
/P
R
: 3.375 MHz
Quantizing:
8 bits
Audio system
Tape transport system
Sampling frequency:
48 kHz (synchronized with video)
Quantizing:
16 bits
Frequency response:
20 Hz to 20 kHz
Tape format:
L-size DVCPRO cassette tapes
Tape speed:
33.820 mm/sec.
Maximum recording time:
184 min. (using the AJ-P184LP)
DC IN (XLR, 4 pins, male):
DC 12 V (DC 11 V to 17 V)
DC OUT (4 pins):
DC 12 V (DC 11 V to 17 V), max. 1 A
PHONE OUT (stereo mini jack)
LENS (multi-connector, 12 pins)
EVF (multi-connector, 20 pins)
REMOTE (ECU, 6 pins)
Wireless (25 pins, D-SUB female)
Other
[CONNECTOR SECTION]
AUDIO IN CH1/CH2 (XLR
k
2, 3 pins):
LINE/MIC/MIC+48V switching system
MIC:
–40, –50, –60 dBu menu-selectable
LINE:
–6, 0, +4 dBu menu-selectable
MIC+48V: Phantom +48V supported
MIC IN (XLR, 3 pins):
MIC/MIC+48V switching system
MIC:
–40, –50, –60 dBu menu-selectable
MIC+48V: Phantom +48V supported (menu-selectable)
GEN LOCK IN (BNC):
1.0 V[p-p], 75
≠
TC IN (BNC):
0.5 to 8 V[p-p], high impedance
Input
CAMERA OUT (BNC):
1.0 V[p-p], 75
≠
VIDEO OUT (BNC):
1.0 V[p-p], 75
≠
S-VIDEO OUT (S connector)
Y signal: 1.0 V[p-p], 75
≠
C signal: 0.286 V[p-p], 75
≠
AUDIO OUT CH1/CH2 (RCA
k
2):
–6 dBu, low impedance, unbalanced
TC OUT (BNC):
2.0 V[p-p], low impedance
Output
Specifications