Planet Technology WGS3-404 - Manual (Page 73)

WGS3 Layer 3 Switch User’s Manual - 65 -
4.5.6.1.2 Configuring Port Groups
You can create a new VLAN group or modify the members of an existing group by pressing “Select” on
the Add Subnet screen.
Parameter Description
VLAN A VLAN already configured on this switch.
Port Port entries may be marked as:
S : Adds port as a static entry.
P : Adds port as a static entry, and sets the port’ s PVID to this VLAN ID.
NOTE: Use the and buttons to scroll through the table. To display a specific
page, set the page number in the Page field and then press . To modify a VLAN,
highlight the entry in the table and press Enter. To add a new VLAN, press .