beautypg.com

Planet Technology WGS3-404 User Manual

Page 146

background image

WGS3 Layer 3 Switch User’s Manual

- 138 -

Parameter Description

Type

Shows port type as:

100BASE-TX (10BASE-T / 100BASE-TX)

1000BASE-T, 1000Base-FX

Admin Status

Shows if the port is enabled, or has been disabled due to abnormal behavior or for

security reasons. See “Configuring Port Parameters”.

Link Status

Indicates if the port has a valid connection to an external device.

Speed Status

Indicates the current port speed.

Duplex Status

Indicates the port’ s current duplex mode.

Flow Control Status Shows the flow control type in use. Flow control can eliminate frame loss by

“blocking” traffic from end stations

connected directly to the switch.

VLAN ID

The VLAN ID assigned to untagged frames received on this port. Use the PVID to

assign ports to the same untagged VLAN.