Planet Technology WGS3-404 - Manual (Page 222)

WGS3 Layer 3 Switch User’s Manual - 214 -
5.8.6 IP Menu
This menu contains IP subnets information, the ARP cache, routing table, as well as multicast groups
and multicast routing information.
Menu Description
Subnet
Information
Displays all the IP subnets configured on this switch, as well as the corresponding
VLANs and ports.
ARP Table Shows the IP-to-MAC addresses discovered by ARP.
Routing Table Shows the routes through which all recognized Ethernet networks (and the
corresponding VLAN) can be reached.
Multicast Table Displays all the multicast groups active on this switch, including the multicast IP address
and the corresponding VLANs. Also includes the IGMP registration table, the multicast
forwarding cache, and DVMRP routing information.
OSPF Table Displays a link state advertisement summary, the neighbor table, and the virtual
neighbor table.
5.8.6.1 Displaying Subnet Information
You can display a list of all the IP interfaces configured on this switch. This table includes the gateway
address, corresponding VLAN, and member ports that use this address.
Parameter Description
IP Address
The address for an IP interface on this switch.
Subnet Mask A template that identifies the address bits in the host address used for routing to
specific subnets. Each bit that corresponds to a “1” is part of the network / subnet
number; each bit that corresponds to “0” is part of the host number.
VLAN The VLAN group associated with this IP interface.
Port Members The ports that can be reached through this IP interface.