Planet Technology WGS3-404 - Manual (Page 194)

WGS3 Layer 3 Switch User’s Manual - 186 -
5.7.5.1 Subnet Configuration).
5.7.5.2.1 Setting the ARP Timeout
You can use the following configuration screen to modify the aging time for dynamically learned entries in
the ARP cache.
Parameter Default Description
ARP Timeout 20 minutes The time that dynamically learned entries are retained in the ARP cache.
Range: 0-999 minutes, where 0 disables aging
5.7.5.2.2 Setting the RIP Advertisement Policy
You can use the following configuration screen to set the timing interval and policies RIP uses to
advertise route information.
Parameter Default Description
RIP Update Time 30 seconds The interval at which RIP advertises known route information.
Range: 0-999 seconds, where 0 disables route advertisements