Panasonic KX-FC195AL - Manual (Page 59)

8. Programmable Features
57
4. Press {e} or {v} repeatedly to display
“ TONE OPT”.
5. Press {>}.
6. Press {e} or {v} repeatedly to display the
desired item.
For the key tone, select “
KEY TONE”.
For the call waiting tone, select “ CALL
WAITING”.
For the range warning alarm, select
“
RANGE ALARM”.
For the battery low alarm, select “ BATTERY
LOW”.
7. Press {>}.
8. Press {e} or {v} repeatedly to select “ ON”
or “ OFF”.
9. Press {>} or {j}.
10. Press {ih}.
Display option settings
Selecting the standby mode display
1. Press {j}.
2. Press {e} or {v} repeatedly to display
“ SETTING HS”.
3. Press {>}.
4. Press {e} or {v} repeatedly to display
“ DISPLAY OPT”.
5. Press {>}.
6. Press {e} or {v} repeatedly to display
“ STANDBY MODE”.
7. Press {>}.
8. Press {e} or {v} repeatedly to select the
desired setting.
“
CLOCK” (default): Time and date will be
displayed. Set the time and date on the
handset beforehand (page 23).
“
OFF”: Deactivates this feature.
“ BS NO”: The base unit number will be
displayed.
“
HS NO”: The handset number will be
displayed.
9. Press {>} or {j}.
10. Press {ih}.
Note:
L If you subscribe to a Caller ID service, the
display will show the number of new calls
even if “
CLOCK” has been selected.
Selecting the talk mode display
1. Press {j}.
2. Press {e} or {v} repeatedly to display
“ SETTING HS”.
3. Press {>}.
4. Press {e} or {v} repeatedly to display
“ DISPLAY OPT”.
5. Press {>}.
6. Press {e} or {v} repeatedly to display
“ TALK MODE”.
7. Press {>}.
8. Press {e} or {v} repeatedly to select the
desired setting.
“
TALK TIME” (default): Length of a call will
be displayed.
“
PHONE NO”: A phone number will be
displayed.
9. Press {>} or {j}.
10. Press {ih}.
Note:
L Even if you select “ PHONE NO”, the other
party’s telephone number will not appear on
your display in the following cases:
–
When you receive calls without
subscribing to a Caller ID service, or
– When you switch a call from the base unit
to the handset.
Selecting the display language
1. Press {j}.
2. Press {e} or {v} repeatedly to display
“ SETTING HS”.
3. Press {>}.
4. Press {e} or {v} repeatedly to display
“ DISPLAY OPT”.
5. Press {>}.
6. Press {e} or {v} repeatedly to display
“ LANGUAGE”.
7. Press {>}.
8. Press {e} or {v} repeatedly to select the
desired language from “ ENGLISH” (default),
“ GERMAN”, “SPANISH”, “FRENCH”,
“ ITALIAN”, “DUTCH”, “TURKISH”,
“ HUNGARIAN”, “PORTUGUESE”, “POLISH”
and “ F43 00”.
9. Press {>} or {j}.
10. Press {ih}.
Note:
L If you set a language you cannot read, reset
the handset settings to their default settings
(page 59).
L If “ F43 00” is selected in step 8, the
Command Interface will be displayed instead
FC195AL.book Page 57 Tuesday, November 18, 2003 10:28 AM