Panasonic KX-FC195AL - Manual (Page 47)

7. Answering Device
45
Incoming Messages
7.3 Listening to recorded
messages
When the unit has recorded new voice
messages:
–
The PLAY MESSAGES indicator will flash.
– The display will show the total number of
recorded messages.
Example:
02
– The unit will beep slowly if the message alert
feature is activated (feature #42, page 53).
Press {PLAY MESSAGES}.
L Only the new recorded messages will be
played.
L Adjust the speaker volume using {A} or {B}.
L After playing back all of the new messages,
the PLAY MESSAGES indicator will stop
flashing but will remain lit up. If you press
{
PLAY MESSAGES} at this time, all the
recorded messages will be played.
To repeat a message
Press {<} while listening to the message.
L If you press {<} within 5 seconds of the
beginning of the message, the previous
message will be played.
L To play back a specific message, press {<}
or {>} and search for the message you want
to listen to.
To skip a message
Press {>} to play the next message.
To stop playback temporarily
Press {STOP}.
L If you press {PLAY MESSAGES} within 1
minute, the unit will resume playing the rest of
the messages.
Voice time/day stamp
During playback, a synthesised voice will
announce the day of the week and time that each
message was recorded.
To change the playback speed
Press {QUICK} to play messages at one and a
half times the original speed. Press {SLOW} to
play messages at half the original speed.
L To return to the original speed, press either
{
QUICK} or {SLOW} again during quick or
slow playback.
7.3.1 Erasing recorded
messages
To erase a specific message
Press {ERASE} while listening to the message
you want to erase.
To erase all the messages
1. Press {ERASE}.
2. Press {SET}.
3. Press {SET} again.
L Messages recorded in the voice mailbox will
not be erased.
Remote Operation
{ SET}
{<}{>}{A}{B}
{ STOP}
PLAY MESSAGES
FLASH/LIGHT
{ ERASE}
{ QUICK}
{ SLOW}
FC195AL.book Page 45 Tuesday, November 18, 2003 10:28 AM