Panasonic KX-FC195AL - Manual (Page 26)

2. Preparation
24
Example: 10 August, 2003
Press {1}{0} {0}{8} {0}{3}.
D:10/M:08/Y:03
TIME: | 12:00AM
5 Enter the current hour/minute by selecting 2
digits for each. Press {*} to select “
AM” or
“ PM”.
Example: 3:15PM (12 hour clock entry)
1. Press {0}{3} {1}{5}.
D: | 10/M:08/Y:03
TIME: 03:15AM
2. Press {*} repeatedly to display “ PM”.
D: | 10/M:08/Y:03
TIME: 03:15PM
6 Press {SET}.
L The next feature will be displayed.
7 Press {MENU} to exit the program.
Note:
L This information will be printed on each page
transmitted from your unit.
L The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
24 hour clock entry
If you select the clock display to “
24H” (feature
#19, page 52), enter the clock in step 5 as
follows:
Example: 15:15 (3:15PM)
Press {1}{5}{1}{5}.
2.7 Your logo
The logo can be your company, division or name.
1 Press {MENU}.
SYSTEM SET UP
PRESS NAVI.[( )]
2 Press {<} or {>} repeatedly to display the
following.
YOUR LOGO
PRESS SET
3 Press {SET}.
L Cursor ( | ) will appear on the display.
LOGO= |
4 Enter your logo, up to 30 characters. See the
character table on page 25 for details.
5 Press {SET}.
L The next feature will be displayed.
6 Press {MENU} to exit the program.
Note:
L This information will be printed on each page
transmitted from your unit.
To enter your logo
Example: “
BILL”
1. Press {2} 2 times.
LOGO= | B
2. Press {4} 3 times.
LOGO=B | I
{ MENU} { MUTE}
{ RECALL}
{ SET} {<}{>}{A}{B}
{ STOP}
FC195AL.book Page 24 Tuesday, November 18, 2003 10:28 AM