Polycom SOUNDPOINT 3804-11530-222 - Manual (Page 45)

Release Notes - SIP Application Changes
Copyright © 2007 Polycom, Inc. Page 39
.cfg
File Action Parameter Description
sip removed lcl.ml.lang.cpt.x,
lcl.cpt,
lcl.cpt.menu.x,
lcl.cpt.chord.cp.x.y.freq.z,
feature.10.name = cpt-settings
feature.10.enabled = 1 Removed the parameters used to configure
the call progress tone localization menu.
In order to still use this feature, the old
configuration parameters should be added
to the sip.cfg file and a new parameter,
feature.cpt.enabled, must be added and set
to 1.
sip changed tone.chord.ringer.46.offDur from 200
to 0,
tone.chord.ringer.46.repeat from 1 to
2
Settings for se.pat.ringer.12
Changes to make ring type 12 work as
expected.
sip changed voice.gain.tx.digital.chassis.IP_430
from -3 to 0
voice.handset.txag.adjust.IP_430
from 24 to 21 Gain corrections for SoundPoint IP 430
platform.
sip changed bitmap.IP_400.61.name from
IdleDefault to “”
bitmap.IP_500.61.name from
IdleDefault to “”
bitmap.IP_600.65.name from
IdleDefault to “”
bitmap.IP_4000.66.name from
IdleDefault to “”
Removed compiled-in Polycom idle display
indicator bitmap.
sip changed HEADSET_MEM IP_300 indicator to
use indicator #50
HEADSET_MEM IP_500 indicator to
use indicator #50
ind.class.4.state.6.index from 48 to 50 Changed due to rearrangement of other
indicators.
sip changed ind.anim.IP_400.38.frame.1.bitmap
from IdleDefault to “”
ind.anim.IP_500.38.frame.1.bitmap
from IdleDefault to “”
ind.anim.IP_500.39.frame.1.bitmap
from IdleDefault to “”
ind.anim.IP_600.38.frame.1.bitmap
from IdleDefault to “”
ind.anim.IP_600.39.frame.1.bitmap
from IdleDefault to “”
ind.anim.IP_4000.38.frame.1.bitmap
from IdleDefault to “”
ind.anim.IP_4000.39.frame.1.bitmap
from IdleDefault to “” Removed compiled-in Polycom idle display
indicator bitmap.
sip changed res.quotas.1.value from 2000 to 600 Reduced default resource quota limits for
tones.
phone1 added reg.x.lcs Default = 0. Can be 0 or 1.
If set to 1 the LCS server is supported for
registration ‘x’.
phone1 added reg.x.server.y.expires.overlap Same interpretation as
voIpProt.server.y.expires.overlap for
registration ‘x’.
phone1 added reg.x.outboundProxy.address Same interpretation as
voipProt.SIP.outboundProxy.address for
registration ‘x’.