Polycom SOUNDPOINT 3804-11530-222 User Manual

Page 24

Release Notes - SIP Application

Changes

Page 18

• 34443: A remote-on-hold call on a line is not picked up by the first press of the

line key with some SIP servers

• 34508: In a G.729 call, SoundPoint IP 50X and 60X phones may reboot with a

DSP assertion failure. This problem is more likely in conference calls and can
be reliably reproduced within 20 minutes of the call start.

• 34723: RTCP transmission interval is not consistent with industry norms
• 34772: The value of the DLSR field in RTCP sent by the phone can be wrong by

up to about one second

• 34827: There are two places to configure the microbrowser from the phone

web server

• 34882: The configuration page on the phone web server has two “Event 2”

entries in the Global Log Level Limit drop-down list

• 34906: NOTIFY request without dialog content (an 'empty' NOTIFY request,

such as you would get with a subscription renewal when the line is idle) does
not extinguish LED’s lit as a result of previous active dialogs

• 35049: DSP load graph on SoundPoint IP 550 shows slightly incorrect value
• 35228: Phone may have one-way audio when SDP is received with c line below

m line

• 35293: Soft keys have some missing pixels on the SoundPoint IP 430 when the

microbrowser is accessed

• 35308: A known problem in the SoundPoint IP 430 processor may cause the

phone to reboot with a DSP assertion failure instead of restarting the affected
driver

• 35477: When handset AEC is enabled on SoundPoint IP 50X and 60X phones,

echo may occur on speaker phone when switching between handset and
speaker phone

• 35533: The phone’s web server shows the DST start and stop days as Monday

by default instead of Sunday

• 35537:

A saturated transmit signal may cause SoundPoint IP 430 phone to

reboot

• 35573: After selecting the Russian language and accessing the microbrowser,

the phone may freeze

• 36012: Conference host may indicate phone is muted but audio is heard by far

end after one leg ends call