Polycom SOUNDPOINT 3804-11530-222 - Manual (Page 19)

Release Notes - SIP Application Changes
Copyright © 2007 Polycom, Inc. Page 13
.cfg File Action Parameter Description
sip changed tone.chord.ringer.46.offDur="200" to
“0”
tone.chord.ringer.46.repeat="2" to
“1”
sip changed se.pat.ringer.12.inst.1.type="silence"
to “chord”
se.pat.ringer.12.inst.1.value="100"
to “46”
se.pat.ringer.12.inst.2.type="chord"
to “silence”
se.pat.ringer.12.inst.2.value="46" to
“200”
se.pat.ringer.12.inst.3.type="silence"
to “chord”
se.pat.ringer.12.inst.3.value="2000"
to “46”
se.pat.ringer.12.inst.4.type="branch"
to “silence”
se.pat.ringer.12.inst.4.value="-2" to
“2000” Note: also added
se.pat.ringer.12.inst.5.type=”branch”
and se.pat.ringer.12.inst.5.value="-4"
sip changed voice.audioProfile.G722.jitterBufferS
hrink="500" to “1500”
voice.audioProfile.G722.jitterBufferM
ax="160" to “200” Audio performance tuning.
sip changed Several gain and other voice
parameters have been changed. The entire gain section in sip.cfg must
be updated. Failure to do this will
affect the audio performance of the
phone.
sip changed voice.rxEq.hd.IP_650.preFilter.enabl
e="1" to “0”
voice.txEq.hs.IP_650.preFilter.enabl
e="1" to “0”
voice.txEq.hd.IP_650.preFilter.enabl
e="1" to “0”
voice.txEq.hf.IP_650.preFilter.enabl
e="1" to “0” Audio performance tuning.
sip changed voice.handset.txag.adjust.IP_430="2
4" to “9”
voice.handset.sidetone.adjust.IP_43
0="-13" to “0” Audio performance tuning.
sip changed Multiple parameters in the
ind.anim.xxx, ind.class.xxx and
ind.gi.xxx sections. The entire indicator section in sip.cfg
must be updated. Failure to do this
will affect the appearance of the
display.
sip changed res.finder.minFree=”1200” to “600”
sip removed ind.anim.xxx parameters from
CTX_CUSTOM1 to CTX_CUSTOM8
and CTX_UNASSIGNED for all
platforms
These parameters were not used.
sip removed usb.enable
usb.bulkDrive.enable
usb.bulkDrive.name These parameters were not used.
phone1 added reg.x.csta Not currently used, will be used in a
future release.