4 configuration file parameter changes – Polycom SOUNDPOINT 3804-11530-222 User Manual
Page 37
Release Notes - SIP Application
Changes
Copyright © 2007 Polycom, Inc.
Page 31
• 17573: In some scenarios, phone sends 603-Decline after 2 rings on SCA line
• 17639: Expansion Module updates should be continuously done in the
background
• 17656:
Phone does not handle outbound fragmented packets that are tagged
for VLAN
• 17706: Phone may freeze after regaining connection with LCS server
• 17783: PRACK message goes directly between phones instead of via LCS
server because of no record-route
• 17797: In some scenarios, phone sets its own presence status to 'Away' when
using the LCS server
• 17831: In some scenarios, phone adds itself to its own buddy list when using
the LCS server
• 17976: NTLM signature should include full "From:" URI
2.12.4 Configuration File Parameter Changes
.cfg
File
Action Parameter
Description
sip removed
call.callWaiting.prompt
sip removed
sec.srtp.offer,
sec.srtp.require,
sec.srtp.key.lifetime
sip
added
voIpProt.SIP.pingInterval
This parameter is used together with
reg.x.proxyRequire. It specifies the number
of seconds between PING messages sent
by the phone.
Default = 0 = disabled.
Possible range is 0 to 3600.
Note: Server support is required before this
feature can be used.
sip
added
res.finder.minFree
This parameter is used to ensure that the
phone will not download resources which
could leave it with insufficient memory to
function correctly. A resource will not be
downloaded if the phone has less memory
free than res.finder.minFree [kBytes].
This parameter can have the values 1 to
2048. The recommended configuration file
value is 1200. If the parameter is left empty
the default is 800.
Notes:
Setting this value too small may affect
functionality of the phone.
Setting this value too large may mean that
some resources are not downloaded at boot
time.