Polycom SOUNDPOINT 3804-11530-222 User Manual

Page 44

Release Notes - SIP Application

Changes

Page 38

.cfg
File

Action Parameter

Description

sip added

qos.ip.rtp.dscp

This

parameter allows the DSCP of packets

to be specified. If set to a value this will
override the other qos.ip.rtp… parameters.
Default is Null which means the other
qos.ip.rtp… parameters will be used.
Possible values are 0 to 63, EF, AF11,
AF12, AF13, AF21, AF22, AF23, AF31,
AF32, AF33, AF41, AF42 or AF43.

sip added

qos.ip.callControl.dscp

This

parameter allows the DSCP of packets

to be specified. If set to a value this will
override the other qos.ip.callControl…
parameters. Default is Null which means the
other qos.ip.callControl… parameters will be
used.
Possible values are 0 to 63, EF, AF11,
AF12, AF13, AF21, AF22, AF23, AF31,
AF32, AF33, AF41, AF42 or AF43.

sip

added

pres.reg

Default = 1. Can be 1, 2, 3, …. Must be a
valid line/registration number. If the number
is not a valid line/registration number, it is
ignored.
Specifies the line/registration number used
to send SUBSCRIBE for presence.

sip

added

mb.idleDisplay.home

mb.idleDisplay.home can be empty or any
fully formed valid HTTP URL. Length up to
255 characters.
Default is empty.
This specifies the URL used for the
microBrowser idle display home page.
Example: http://www.example.com/
xhtml/frontpage.cgi?page=home.
If empty, there will be no micro Browser idle
display feature.

sip

added

mb.idleDisplay.refresh

Can be 0 or an integer greater than 5.
Values from 1 to 4 will be ignored, and 5 will
be used instead.
Default = 0
This specifies the period in seconds
between refreshes of the microBrowser idle
display content.
0 = the idle display microBrowser is not
refreshed.
Note: If an HTTP Refresh header is
detected, it will be respected, even if this
parameter is set to 0. The use of this
parameter in combination with the Refresh
HTTP header may cause the idle display to
refresh at unexpected times.

sip

removed

voIpProt.SIP.WM50

For selecting between Windows Messenger
4.7 and 5.0 (no longer supported).