Paxar Mobile Printing Station Monarch 9476 - Manual (Page 56)

Changing Fuses ------------------------------------------------------------------------------------------
There are two fuses for the Station: one connected to the
battery (battery fuse), and one connected to the external
power socket (AC fuse).
The power switch on the front of the Station must be off while
changing fuses. (The status light near the power switch
should be OFF.)
Changing the Battery Fuse
w Only qualified service personnel may change the battery fuse.
1. Turn the Station’s power supply off and unplug the power
cord. (Figure 40.)
Figure 40
Power
Switch
Status
Light
9476 Assembly and Setup Instructions
4-2