beautypg.com

Paxar Mobile Printing Station Monarch 9476 User Manual

Page 22

background image

3. Place the battery on the cabinet floor. Remove the

cardboard packaging. Use a 15mm bolt, washer,
lockwasher, and M5 nut to attach the white battery wire to
the positive (+) battery post. (Figure 11.)

4. Slide the battery to the back of the cabinet.

5. Use a 15mm bolt, washer, lockwasher, and M5 nut to

attach the two black wires and green (ground) wire to the
negative (-) battery post. (Figure 11.)

6. Position the battery between the retainer rods. The writing

on the battery should face out. (Figure 12.)

Figure 11

Green
Ground
Wire

Black
Wires

Negative (-)

Positive (+)

White
Wire


9476 Assembly and Setup Instructions


1-16