Paxar Mobile Printing Station Monarch 9476 - Manual (Page 38)

9. Feed the supply’s leading edge into the printer’s fan-fold
slot. The black mark on the supply must be facing up; if it
is not, flip the supply stack over. Make sure the arrow
printed on the back of the supply points toward the printer.
Center the supply in the printer by lining up the black mark
within the centering notch. (Figure 27.)
10. Adjust the supply guides to the edges of the supply and
turn the latches to lock the supply guides in place.
(Figure 27.)
Figure 27
Fan-Fold
Slot
Centering
Notch
Arrow
Black
Mark
Supply
Guide
Latch
9476 Assembly and Setup Instructions
2-6