Paxar Mobile Printing Station Monarch 9476 - Manual (Page 12)

Step 2: Adjusting the Station’s Height--------------------------------------------------
1. Remove the following items from their packaging:
✦ (4) 1/4"-20 x 3/4" bolts (black)
✦ (4) 1/4"-20 wing nuts (black)
✦ (1) plastic cable-tube clamp (may already be attached
to the cable tube)
2. Turn the Station right side up.
3. Open the Station’s cabinet and remove the packaging from
around the bottom of the cable tube and from the cables.
4. You might need another person’s help with this step. Lift
the top shelf to the second-highest height adjustment.
Make sure the cables inside the cable tube feed freely as
you lift the top shelf. Insert bolts into the holes in all four
legs and fasten them with wing nuts as shown. (Figure 3.)
Figure 3
Cable
Clamp
Cable
Tube
9476 Assembly and Setup Instructions
1-6