Paxar Mobile Printing Station Monarch 9476 - Manual (Page 14)

2. Open the Station’s cabinet. Press the chrome handle
insert into the cabinet door and fasten it with two 5/8"
phillips screws. (Figure 4.)
3. Position the cord bracket over the mounting holes on the
lower shelf ’s edge shown. Fasten the bracket with two
1/2" slotted screws and 8-32 nuts/lockwashers. (Figure 4.)
Step 4: Attaching Optional Items----------------------------------------------------------
This section describes how to attach the optional drop shelf,
push handle, and data entry terminal cradle. Each optional
item and necessary mounting hardware is packaged
individually. These are optional items; if you did not order
them, skip to step 5.
Figure 4
Cord
Bracket
Handle
Insert
9476 Assembly and Setup Instructions
1-8