beautypg.com

Paxar Mobile Printing Station Monarch 9476 User Manual

Page 16

background image

Attach the Drop Shelf

1. Remove the following items from their packaging:

(1) support brace

(1) metal rod

(1) drop shelf

(2) end caps

(2) 1/4"-20 x 1/2" phillips screws

(2) plastic washers

2. Attach the support brace to the Station’s corner supports

on either the front or the rear of the Station using two 1/2"
phillips screws. The open side of the support brace must
face down. (Figure 6.)

n

Do not tighten the screws completely.

Figure 6

Corner
Support

Support
Brace


9476 Assembly and Setup Instructions


1-10