Printek 8000 User Manual

Page 79

Text mode
Original mode

P R I N T E R C O N F I G U R A T I O N

Host Bin Select

Enable

Possible Values:

Enable*, Disable

This item selects whether the host is able to change bin (form) selections or
if it is controlled only by the printer control panel.

Test Mode

Off

Possible Values:

Off*, EBCDIC Code Dump, Loopback

This item selects the test mode within the CX/TX interface. When set to

Off

, the printer will operate normally. When set to

EBCDIC Code Dump

, the

printer will print the EBCDIC value of the characters received to assist
programmers in software debugging (for more information refer to the
FormsMaster 8000 Series Programmer’s Manual). When set to

Loopback

the interface will perform internal diagnostics and print the result.

Reserved Parameter

(new)Parameter4

(unused)0

Possible Values:

(unused)0*, 1 - 255

This item is reserved for future use.