Printek 8000 - Manual (Page 63)

P R I N T E R C O N F I G U R A T I O N
57
Possible Values: No*, Yes
This item selects whether the minimum I/O buffer size should be used.
Setting this item to
No will allow the printer to make maximum use of the
I/O buffer (see “Paper Out Fault” on page 80 for more information on buffer
size). Setting this to
Yes may decrease performance, but is useful when
using the printer with operating systems that try to keep track of which page
is currently being printed by the printer.
Ethernet 10BaseT LAN Interface Items
INTERFACE MENU
LAN
Emulation
Emulation
Epson
Possible Values: Epson*, Basic Bar Codes, IBM
Proprinter, DEC LA120, TTY,
Printek, ANSI X3.64
This item selects the emulation to be used whenever the LAN port is active
(see “Automatic Port Switching” earlier in this section). The emulation
should be set to match the type of printer your software supports.
Automatic Carriage Return
Auto CR
On