Panasonic BB-HCS301A - Manual (Page 94)

Operating Instructions
94
• Clicking [
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting Description
Enable Pre-
trigger Image
Buffer • Check the box to enable the setting. This product buffers or
transfers the image right before the alarm signal is
detected.
• Set an interval, number of images to buffer and total
number. The buffered images may not match the total
number due to memory capacity, image resolution, image
quality or what object you view.
Enable Post-
trigger Image
Buffer • Check the box to enable the setting. This product buffers or
transfers the image right after the alarm signal is detected.
• Set an interval, number of images to buffer and total
number. The buffered images may not match the total
number due to memory capacity, image resolution, image
quality or what object you view.