Panasonic BB-HCS301A - Manual (Page 105)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 105
6. Set the image buffer frequencies, and click [Next>].
Note
Due to the network environment, object, number of accesses, enabling IPsec,
this product may not record the numbers of images as you set. In this case, set
the image buffer frequencies longer.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
• Clicking [
Setting Description
Enable Pre-
trigger Image
Buffer • Check the box to enable the setting. This product buffers or
transfers the image right before the motion detection signal
is detected.
• Set an interval, number of images to buffer and total
number. The buffered images may not match the total
number due to memory capacity, image resolution, image
quality or what object you view.
Enable Post-
trigger Image
Buffer • Check the box to enable the setting. This product buffers or
transfers the image right after the motion detection signal
is detected.
• Set an interval, number of images to buffer and total
number. The buffered images may not match the total
number due to memory capacity, image resolution, image
quality or what object you view.