Panasonic BB-HCS301A - Manual (Page 72)

Operating Instructions
72
Adjusting local audio and remote audio
When [Local Audio + Remote Audio] is selected on the Audio page, audio from the
audio input terminal (Local Audio) and audio from the microphone connected to
your PC (Remote Audio) are mixed and outputted from the audio output terminal.
If they are not balanced well, adjust the audio following the procedures below.
1. Adjust the remote audio (the volume of the microphone connected to your PC).
• In this example, the menus and windows are described as in Windows XP.
(1) Click [Start] [Settings] [Control Panel] on the Start menu.
(2) Click [Sounds, Speech, and Audio Devices] [Sounds and Audio
Devices].
(3)
Click the [Audio] tab, and click [Volume...] in the Sound recording.
(4)
Confirm that the Microphone is checked, and adjust the volume bar.