Panasonic BB-HCS301A - Manual (Page 115)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 115
2.21 Starting the SD Memory Recording
The SD memory recording can be started on the Trigger page.
Notes
• You can confirm the SD memory capacity on the Status page (see page
133).
• If this product is restarted (see page 134), the SD memory recording
starts again.
• If you remove the SD memory card and insert it again (see page 165), the
SD memory recording starts again.
1.
Click [Trigger] on the Setup page.
2.
Click [SD video recording start].
• "SD video recording was started." is displayed.
3. Click [Go to Trigger page].
• The Trigger page is displayed.
Note
Ensure that recording has stopped before removing the SD memory card.
(See page 114) Do not remove the SD memory card, nor restart or turn off this
product while recording images on the card. Doing so can cause a decrease
in SD memory card capacity, data corruption or camera malfunction.