White balance, Wiper mode – Pelco ESPRIT ES30C User Manual
Page 40
40
C309M-J (9/04)
WHITE BALANCE
The settings for white balance are as follows:
Auto white bal
R Gain
B Gain
To change the white balance settings:
1.
Program preset 95 (28). The main menu appears.
2.
Position the cursor (>) beside Camera.
3.
Press the Iris Open button to enter the Camera menu.
4.
Position the cursor (>) beside Next.
5.
Press the Iris Open button to go to the Next menu.
6.
Position the cursor (>) beside White Balance.
7.
Press the Iris Open button. The White Balance menu appears.
8.
Position the cursor (>) beside one of the following choices and press the Iris Open button.
8.
Move the joystick up or down to make a selection.
9.
SELECT – Press the Iris Open button on your keyboard to select your choice.
CANCEL – Press the Iris Close button if you do not want to change the setting.
Auto white bal
On
R Gain
182
B Gain
182
Exit
White Balance Menu
Exit
MAIN MENU
Backlight comp
Off
Zoom limit
x- -
Reset camera
Next
Exit
Camera Menu
LowLight limit
Auto
Shutter speed
Auto
Auto focus mode
Auto
Prev
Exit
Next Menu