Pixel Magic Systems MTV5000 - Manual (Page 24)

47 46
7.2 Video
Video Output Format
50/60Hz As Hong Kong DTT programmes will normally be
broadcast in 50Hz, selection of a 50Hz format from the list below is
recommended. However, some TVs (perhaps from Japan or America
where broadcasts are in 60Hz) may not happily accept a 50Hz signal.
In this case choose from the list of 60Hz formats provided.
As the S-Video and Composite Video outputs are Standard Definition
only, they will output PAL if a 50Hz setting has been chosen and NTSC if
a 60Hz output has been chosen.
The maximum output of Component is 1080i. If 1080p 50Hz or 60Hz
is selected, the HDMI port will output 1080p and the Component will
output 576i and 480i respectively.
The minimum output of HDMI is 480p or 576p. If 480i or 576i is
selected, the HDMI output will be 480p or 576p respectively.
To ensure that you can always see a picture, Magic TV™ will
automatically revert back to the previous format after 15 seconds
if you haven’t responded to the on-screen prompt.
Black Enhancer
This feature can provide more image depth when used in certain systems.
Try it and see which you prefer.
Image Mode
This option can help boost contrast in channels if they appear flat or
‘washed out’.
This setting is saved for each channel, so ensure that you are tuned
to the channel you want to adjust before making the adjustment.
Natural*
Dynamic
Off
On *
1080i (50Hz) * The default setting – accepted by all HDTVs
1080p (50Hz) A good choice if your TV accepts a 1080p
HDMI input
720p (50Hz) A good choice if your ‘HD Ready’ TV has 720 or
768 lines of resolution
576i (50Hz) Use only if your TV is Standard Definition
576p (50Hz)
1080i (60Hz)
1080p (60Hz)
720p (60Hz)
480i (60Hz)
480p (60Hz)
7
Magic TV™ Settings
7.1 Info Format
Menu Language
This menu allows you to choose the language for the
Magic TV™ menus.
Auto Info Banner
When the channel is changed, or Live TV is first accessed,
the ‘Info Banner’ will show. This setting allows you to choose
the time taken before it disappears.
Front Panel Brightness
From here, you can select a reduced brightness setting for
the front panel.
Front Panel Clock
Normally, when Magic TV™ is in ‘Standby’, the front panel will display
the current time. This menu allows this feature to be turned off.
OSD Transparency
When the Magic TV™ menus overlay a TV programme, they are
transparent so that you can still see the moving image below.
The level of transparency can be set here.
Recording OSD Logo
During recording Magic TV™ will display a logo for 3 seconds
at 10 seconds intervals. This setting allows you to turn the logo off.
Playback OSD Logo
During playback of recorded programmes Magic TV™ will display a
logo for 3 seconds at 10 seconds intervals. This setting allows
you to turn the logo off.
Off
On *
Off
On *
Solid
Low
Medium*
High
Off
On *
Dim
Normal *
Normal *
Slow
Off
English
Traditional Chinese *
Simplified Chinese
7
Magic TV™ Settings
* = default setting * = default setting