Panasonic SV-P20U - Manual (Page 51)

51
Messages on the LCD Monitor
M essage Rem edy
This picture is unreadable. • Either the image format is incompatible or the data
has been destroyed.
There is no SD/MMC card inserted. • Insert the SD Memory Card or MultiMediaCard.
Card can’t be used. • Insert a card which can be used.
There is no picture. • Use a card with images recorded on it.
Now searching. • The card is being read. Please wait for a while.
There is no ink cassette. • Insert an Ink Cassette.
Paper jam has occurred. • Remove the jammed paper.
There is no ink. • Replace the Ink Cassette with a new one.
Temperature is too high, please wait. • Wait for a moment. (Internal temperature)
Image Printing. Please wait do not
remove paper. • Please wait.
External light is entering the printer
mechanism. Please reposition the
printer. • A strong light is streaming in through the paper
sliding slot. Because this may cause a malfunction,
adjust the direction of the printer.
Insert paper to print. • Insert the printing paper correctly.
Remove paper. • Remove the paper.
This function can’t be used because
there is no card. • Insert the card.
This function is not available
because this card can’t be used. • Insert the proper card.
This function can’t be used because
there is no picture on the card. • Use a card with images recorded on it.
This function can’t be used because
no files have DPOF setting. • DPOF-set files are not available and DPOF-printing
cannot be activated.
Battery needs to be recharged. • Recharge the battery.
Printing Image from PC. • Printing an image on the PC.
This item can be set up only while
using AC Adapter. • This item can be set only when the AC adaptor is
connected.
Last print job interrupted. To abort
push [MENU]. • If you wish to continue printing, wait until the
message disappears.