Specifications – Philips FW-V220/21 User Manual
Page 30
30
English
3139 115 20823
Specifications
AMPLIFIER
Output power ................................. 2 x 20 W RMS
(1)
............................................................................. 1000 PMPO
Signal-to-noise ratio ..........................
≥ 67 dBA (IEC)
Frequency response ......................... 80 – 15,000 Hz
Input sensitivity
AUX In ...................................................................... 700 mV
Microphone .............................................................. 3.5 mV
Output
Speakers .......................................................................
≥ 6 Ω
Headphones .......................................... 32
Ω – 1000 Ω
(1)
(6
Ω, 1 kHz, 10% THD)
DISC PLAYER
Number of programmable tracks ......................... 99
Frequency response ......................... 20 – 20,000 Hz
Signal-to-noise ratio .......................................
≥ 80 dBA
Channel separation ..........................
≥ 60 dB (1 kHz)
Total harmonic distortion ........................... < 0.003%
MPEG 1 ................................................. VCD version 2.0
MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO
MP3-CD bit rate ................................... 32 – 256 kbps
sampling frequencies ... 48 kHz, 44.1 kHz, 32 kHz
TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave range (9 kHz) ............. 531 – 1602 kHz
MW wave range (10 kHz) ........... 530 – 1700 kHz
Tuning grid ............................................................ 9/10 kHz
Number of presets ........................................................ 40
Antenna
FM ..................................................................... 75
Ω wire
AM ............................................................ Loop antenna
TAPE DECK
Frequency response
Normal tape (type I) ........ 80 – 12,500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) ....................................
≥ 48 dBA
Wow and flutter .........................................
≤ 0.4% DIN
SPEAKERS
System .................... 2 way; double port bass reflex
Impedance ........................................................................ 6
Ω
Woofer .................................................... 1 x 4" full range
Dimensions (w x h x d) ..... 210x 310x 235(mm)
Weight ................................................................ 2.5 kg each
GENERAL INFORMATION
Material .............................................................. Polystyrene
................................................ 110 - 127 / 220 - 240 V~;
............................................................ 50/60Hz; Switchable
Power Consumption
Active ............................................................................. 44 W
Standby ..................................................................... < 15 W
Dimensions (w x h x d) ..... 265x 310x 320(mm)
Weight (without speakers) ................................. 5.6 kg
Subject to modification
pg 01-032/V220/21-Eng
28/05/2001, 09:03 AM
30