Philips FW-V220/21 - Manual (Page 16)

16
English
3139 115 20823
CD / VCD / MP3-CD
Note:
– For mixed mode discs, only one mode will be
selected for playback depending on the recording
format.
Loading a Disc
1 Press VCD to select VCD/CD mode.
2 Press OPEN•CLOSE.
➜ The disc changer tray slides out.
3 Load a disc with the printed side up in the right
tray.
¶ You can load another disc in the left tray.
¶ To load the third disc, press the DISC
CHANGE button.
➜ The disc changer tray will rotate until the
empty tray is ready for loading.
4 Press OPEN•CLOSE to close the disc changer
tray.
➜ The total number of tracks and the playing
time of the selected disc appear on the display.
For MP3-CD only:
➜ The first Album and the first Title information
appear on the display.
Note:
– To ensure good system performance, wait until
the disc changer completely reads the disc(s)
before proceeding.
– For MP3-CD, the disc reading time may exceed
10 seconds due to the large number of songs
compiled into one disc.
Disc Direct Play
¶ To start playback from a selected disc tray, press
DISC 1, DISC 2 or DISC 3 button.
➜ All the available discs will play once, then stop.
Playing a normal disc
For normal VCD:
Ensure that the system is switched to the
corresponding PAL or NTSC system of your
TV set (except multi-system TV).
1 Press PLAYÉÅ to start playback.
➜ All the available discs will play once, then stop.
➜ The disc tray, track number and elapsed
playing time of the current track appear on the
display.
¶ To interrupt playback, press PAUSEÉÅ.
➜ The playing time flashes.
¶ To resume playback, press PLAYÉÅ again.
2 To stop playback, press Ç.
Note:
– During Disc Reading mode, if you press any
button, "
PLEASE WAIT" will be displayed.
Disc Change
You can change the outer two discs while the
third inner disc is stopped or is playing.
1 Press DISC CHANGE.
➜ The disc changer tray slides out.
2 Replace the discs in the left and right disc trays.
¶ If you wish to change the inner disc during
playback, press DISC CHANGE again.
➜ "CHANGING DISC" will be displayed.
➜ The disc will stop playing.
➜ The disc changer tray will close to retrieve
the inner disc and then open again with the
inner disc accessible.
3 Press OPEN•CLOSE to close the disc changer
tray.
Selecting a desired track
Selecting a desired track when playback
is stopped
¶ Press digit 0 – 9 on the remote control to
select the desired track.
➜ Playback will start immediately for the
selected track.
➜ The selected track number and elapsed
playing time appear on the display.
Note:
– Maximum track selection from digital keys on
remote control is 199 for MP3-CD and 99 for
pg 01-032/V220/21-Eng 28/05/2001, 09:03 AM 16