Pentax Optio S4i - Manual (Page 16)

14
1
Double-click the [Unplug or
eject hardware] icon in the task
bar recognized area.
The [Remove Hardware] screen will appear.
2
Confirm that [PENTAX USB
DISK Device] is selected and
click [Stop].
The [Stop Hardware Device] screen
will appear.
3
Confirm that [PENTAX USB
DISK Device] is selected and
click [OK].
A message will appear.
4
Click [OK].
5
Disconnect the USB cable
from your camera and PC.
Disconnecting the Camera from your PC
The computer is downloading the camera’s image data with the
camera is connected to the computer and the camera flash status
lamp (green) is flashing. Image data may be damaged if you
disconnect the camera during such conditions.
Windows 2000 / Me
If the camera (removable disc) is being used by an application such
as ACDSee, the camera cannot be disconnected until the
application is closed.
In the event that an error message is displayed in Step 4, confirm that
the viewfinder lamp is not blinking and then disconnect the camera.
e_00_pc_kb364.book Page 14 Tuesday, February 10, 2004 7:32 PM