Cable compensation/vd2/data – Panasonic WJ-SX 150 User Manual

Page 76

●

Clock

This window configures the unit's clock.
The pattern of the Time & Date box depends on the setting
through the Time & Date window.

This picture is the example for U. S. model.

• How to display

To display this window, click on the

(Clock) button in

the Time & Date window.

• Parameters

Time & Date Box:

To adjust the clock, click on the ▼ or

▲ buttons of Year, Month, Day, Hour and/or Minute

(Put to SX150) button:

Changes the unit's

clock time into the one which has been configured
in this window.

(Cancel Exit) button:

Cancels the configuration

and closes the Clock window.

Note:

The clock display pattern is not updated by click-

ing the

(Put to SX150) button in this win-

dow. The setup file update will be necessary. (Refer
to p. 67 Put a File to SX150.)

■

Cable Compensation/VD2/DATA

This window configures the following parameters of each
camera: the cable length for transmission loss compensa-
tion and whether to send the VD2 timing pulse or control
data with the camera output signals.

●

How to Display

To display this window, click on the

(Cable

Compensation/VD2) button in the main window (p. 65).

●

Parameters

Cable Comp:

Select the cable length for each camera.

Less than 400 m (1 300 ft)

400 m (1 300 ft) to 700 m (2 300 ft)

700 m (2 300 ft) to 900 m (3 000 ft)

VD2:

To send the VD2 timing pulse with the camera

output signal, select ON.
Not send the VD2 timing pulse with the camera out-
put signal, select OFF.

DATA:

To send the control data with the camera output

signal, select ON.
Not send the control data with the camera output
signal, select OFF.