Panasonic WJ-SX 150 - Manual (Page 62)

64
• Intel and Pentium are trademarks of Intel Corporation.
• Microsoft
® Windows ® are either registered trademarks
of Microsoft Corporation in the United States and/or
other countries.
• VD2 is the original synchronization system of
Matsushita Communication Industrial Co., Ltd. and
Matsushita Electric Industrial Co., Ltd.
• Other company names and product names appearing
in the manual are registered trademarks or trademarks
of the company concerned.
Platform
To install WJ-SX150 Administrator Console, the PC should
meet the following requirements.
• Hardware requirements
IBM PC or 100 % compatible, Pentium-400 MHz or
higher, 64 MB RAM, 2 MB hard drive space with addi-
tional space for configuration database (.sdt) and log.
In addition, the PC must be equipped with a serial port.
• Operating system requirements
Microsoft ® Windows ® 98, 98 SE, 2000, XP Professional
• Video display setting requirements
* High color (16 bit) or higher
* 800 x 600 resolution
When installing in the default system setting, the software is
installed in the following directory:
C: \Program Files\Panasonic\SX150
■ Installation/Uninstallation
● Installation
Insert the CD-ROM program disk into the CD-ROM drive on
the PC. Double-click "Setup.exe" to begin the installation.
Respond to the dialog boxes by following the directions
given.
● Uninstallation
1. Select "Start" – "Settings" – "Control Panel".
2. Click on the "Add/Remove Hardware" button.
3. Select WJ-SX150 Administrator Console and click on
"Add/Remove".
4. Operate according to the direction in the window.
● Before Using WJ-SX150 Administrator
Console
1. Select "Start" – "Program" – "Panasonic" – "WJ-SX150
Administrator Console x.xx*" or double-click the "WJ-
SX150 Administrator Console x.x" icon on the desktop.
2. When you launch WJ-SX150 Administrator Console for
the first time, the following window will appear on the
PC screen.
Select “Yes”.
■ Description of WJ-SX150
Administrator Console
WJ-SX150 Administrator Console is a utility software which
can configure the system settings and control data of this
surveillance system.
WJ-SX150 Administrator Console can configure the follow-
ing settings.
● RECORDER
• Recorder (p. 66)
● MANAGEMENT
• Put a File to SX150 (p. 67)
• Get a Configuration Data from SX150 (p. 68)
● SETUP
Sequence Settings
• Tour Sequence (p. 68)
• Group Sequence (p. 69)
Schedule Settings
• Timer Event (p. 70)
• Camera Cleaning (p. 71)
• Daylight Saving Time/Summer Time (p. 71)
Alarm Settings
• Alarm Mode (p. 72)
• Alarm Event (p. 74)
• Alarm Port (p. 74)
Operator Settings
• Operator Registration (p. 75)
• Level Table (p. 76)
• Monitor Selection (p. 76)
• Auto Login/Logout (Auto Log-in/Log-out) (p. 77)
System Settings
• Time & Date (p. 77)
• Cable Compensation/VD2/DATA (p. 78)
• Camera Title (p. 79)
• Data Port (p. 81)
Multiplexer Settings
• Multiplexer Mode (p. 82)
WJ-SX150 Administrator Console
• Select Setup Data File (p. 84)
• Account Manager (p. 85)
• Communication Port (p. 86)
Trademarks
• IBM is a trademark of International Business Machines
Corporation.
WJ-SX150 ADMINISTRATOR CONSOLE