Polaris Sportsman 6x6 - Manual (Page 37)

34
FEATURES AND CONTROLS
Electrical Switches and Indicators
1. Light Switch/Hi-Lo Beam Control - The lights won’t turn on
unless the main switch is on.
WARNING
Activating the override switch while the throttle is open can cause
loss of control, resulting in severe injury or death. Don’t activate
the override switch while the throttle is open.
2. Override Switch (Reverse Speed Limiter) - This vehicle is
equipped with a reverse speed limiter system. To obtain additional
power while backing, depress the override button. The override switch
also allows activation of All Wheel Drive (AWD) in reverse if the
AWD switch is on.
3. Engine Stop Switch - The engine will not
start or run when the switch is off. Its purpose is
to provide the operator with a quick means of
engine shutdown in case of stuck throttle or other
emergency.
NOTE: Both the main switch and the emergency engine stop switch
shut off all electrical power to the entire vehicle, including
lights. To stop the engine, slide the stop switch either right or
left to the OFF position.
4. Main Switch - To start the engine, slide the stop switch to the
center RUN position and turn the main key switch clockwise past the
ON position. Release the key when the engine starts.
The taillight is on whenever the main switch is on. Turn the key off to
prevent battery drain.
5. All Wheel Drive (AWD) Switch
1
2 4 3 5
3