Installation – Pioneer AVH P4300DVD User Manual

Page 79

Connection method

1. Clamp the lead.

2. Clamp firmly with

needle-nosed pliers.

Note:
· The position of the parking brake switch depends on the vehicle model. For details,

consult the vehicle Owner’s Manual or dealer.

Yellow/black
If you use an equipment with Mute function, wire this lead to
the Audio Mute lead on that equipment. If not, keep the Audio
Mute lead free of any connections.

Light green
Used to detect the ON/OFF status of the parking
brake. This lead must be connected to the power
supply side of the parking brake switch.

Blue/white
Connect to system control terminal of the power amp or
auto-antenna relay control terminal (max. 300 mA 12 V DC).

Ground side

Power supply side

Parking brake
switch

Fuse resistor

With a 2 speaker system, do not connect anything to the speaker leads
that are not connected to speakers.

Note:
· Change the initial setting of this unit. The

subwoofer output of this unit is monaural.

Violet/white
Of the two lead wires connected to the back lamp, connect the one
in which the voltage changes when the gear shift is in the
REVERSE (R) position. This connection enables the unit to
sense whether the car is moving forwards or backwards.

Microphone (AVH-P3300BT only)

4 m (13 ft. 1 in.)

Wired remote input

Hard-wired remote control adaptor can be connected
(sold separately).

Section

Installation