Displaying the radio id, Switching the sirius display, Using the instant replay function – Pioneer AVH P4300DVD User Manual
Page 48: 14 detailed instructions, Switching the game alert on or off, When a game of a selected team starts, Displaying game information, Channel number selection setting
5
Repeat these steps to select other
teams.
Up to 12 teams can be selected.
Switching the Game Alert on or off
Once you select the teams, you need to turn
the Game Alert function on.
The Game Alert function is on at the default
setting.
When a game of a selected
team starts
When a game of the selected team is about to
start (or is currently playing) on a different sta-
tion, a game alert is displayed.
Switching to the other station to lis-
ten to the game.
Not tuning in to the other station.
Displaying game information
If any games of the selected teams are cur-
rently playing, you can display information on
the games and tune in to the broadcast chan-
nel.
1
Display the game information for the
selected team.
Refer to Introduction of XM/SIRIUS tuner opera-
tions on page 29.
2
Touch c or d to select a game.
The game is displayed, followed by more de-
tailed game information.
! The game score will be updated automati-
cally.
3
Switch to the other station to listen to
the game.
Switching to the other station to lis-
ten to the game.
# If you have not selected any teams, NOT SET
is displayed.
# When games involving your favorite teams are
not currently playing,
NO GAME is displayed.
Displaying the Radio ID
Channel number selection setting
If you select
CH000, the ID code is displayed.
% Select CH000.
Refer to Introduction of XM/SIRIUS tuner opera-
tions on page 29.
Switching the SIRIUS display
! Actions will differ depending on the con-
nected SIRIUS tuner.
% Touch SIRIUS information to switch the
SIRIUS display.
Refer to Introduction of XM/SIRIUS tuner opera-
tions on page 29.
Channel number
—Channel name—Category
name
—Artist name—Song title/Title name—
Composer name
—Play time
Note
Play time is displayed during the Instant Replay
mode.
Using the Instant Replay
function
The following functions can be operated in In-
stant Replay mode.
! To use this function, a Pioneer SIRIUS bus
interface (e.g. CD-SB10) is required.
! To use this function, a SIRIUS plug-and-
play unit with an Instant Replay Function is
required.
! For details, refer to the SIRIUS plug-and-
play unit
’s manuals.
En
48
Section
14
Detailed instructions