Planet Technology DVR4-ALERT SW242-ALR - Manual (Page 52)

PLANET VIP-110/VIP-210 Web Configuration Guide
- 49 -
Pick up handset and dial “02201”, where ‘02’ points to VIP B and ‘201’ for port 1 of VIP B. The
phone in VIP B should rings.
VIP B:
Pick up handset and dial “01201”, where ‘01’ points to VIP A and ‘201’ for port 1 of VIP A. The
phone in VIP A should rings.
After all of above, your VIP can work to each other.
In the example, we assign each VIP with a unique number.
It is easier for users to think of it is as like an area
code. Each VIP represents a different area. VIP A is with
area code 01 and VIP B is with code 02. So, if you have more,
you can assign the next VIP with, 03, 04, etc.
i
Hint
If you cannot hear the ring, please do make sure:
1) Both VIP can ping each other
2) You are connects to a correct port. In this example, it
should be FXS port. And the phone number will be “20X”
where X follows the port.
Make sure you
’ve strip the number in command “atpm aadd”
i
Hint