Planet Technology DVR4-ALERT SW242-ALR - Manual (Page 43)

PLANET VIP-110/VIP-210 Web Configuration Guide
- 40 -
Default: 30000
Outgoing Fast Start This field is to enable or disable the Fast start mode on the outgoing side of the
call.
Default: off
Incoming Fast Start This field is to enable or disable the Fast start mode on the incoming side of the
call.
Default: off
NAT_Call Mode Enables resolve proper calling address from remote sites, which use NAT routers
with private IP networks behind.
Default: on
Default DTMF Mode There are two ways VoIP gateway handles DTMF relay, per H.323 and IMTC
specifications.
Default: H323 V2 Signal
Call Signaling port
Allows users to select TCP port which H.225 listens for incoming call setup
request.
Default: 1720
It is strongly recommended not to modify these parameters
on your own. If you met difficulty to establish commu-
nication toward destination call party, please consult ITSP
engineering staff, experienced personnel or local dis-
tributor support staff for proper configuration.
i
Hint