Cli configuration access – Planet Technology DVR4-ALERT SW242-ALR User Manual
Page 11

PLANET VIP-110/VIP-210 Web Configuration Guide
- 8 -
CLI configuration access
:
•
You can connect the VIP-110/VIP-210 via telnet terminal program
•
Start up your terminal program, here, we use Hyper Terminal as the example.
•
Set up the parameters as below for Telnet connection
Host Address:
192.168.0.1
Port Number: 23
Connect Using: TCP/IP (WinSock)
•
When connected, you
’ll be asked to insert the username/password for machine admini-
stration, please enter
“admin/123” for authentication. After logging in, the terminal will
prompt
“ITG>” to indicate your machine is now ready for operation.
ë
Note
Please locate your PC in the same network segment
(192.168.0.x) of VIP-110/VIP-210. If you
’re not familiar
with TCP/IP, please refer to related chapter on user
’s
manual CD or consult your network administrator for proper
network configurations.