Planet Technology DVR4-ALERT SW242-ALR - Manual (Page 10)

PLANET VIP-110/VIP-210 Web Configuration Guide
- 7 -
5. Check the LEDs
•
The PWR LED should be ON.
•
The CPU LED should flash.
•
For each LAN (PC) connection, the LAN LNK/ACT LED should be ON (provided the PC is
also ON.)
•
The WAN LED should be ON.
6. Connecting to the telephony devices
VIP-110/VIP-210 supports two types of telephony interfaces. One is FXO, and another is
FXS. Each interface has two ports for connecting to telephony devices. FXS interface for
connecting to regular analog telephone sets or FAX machine, FXO interface has the flexibility
of PSTN line (CO line) / PBX connection
Administration Interface
PLANET VIP-110/VIP-210 provides CLI (Command Line Interface), and GUI (Web based,
Graphical User Interface) for machine management and administration.
Web configuration access
:
To start VIP-110/VIP-210 web configuration, you must have one of these web browsers installed
on computer for management
•
Netscape Communicator 4.03 or higher
•
Microsoft Internet Explorer 4.01 or higher with Java support
Default LAN interface IP address of VIP-110/VIP-210 is 192.168.0.1. You may now open your web
browser, and insert 192.168.0.1 in the address bar of your web browser to logon VIP-110/VIP-210
web configuration page.
VIP-110/VIP-210 will prompt for logon username/password, please enter: admin / 123 to continue
machine administration.
Connection of incorrect telephony devices to the ports on
the TIM can cause permanent damage to the TIM and/or VIP.
ë
Note