Panasonic KX-FLM651 - Manual (Page 80)

10. General Information
78
Specifications
10.2 Specifications
Applicable lines:
Public Switched Telephone Network
Document size:
Max. 216 mm (8
1 /
2
") in width, Max. 600 mm
(23
5
/
8
") in length
Effective scanning width:
208 mm (8
3
/
16
")
Effective printing width:
Letter/Legal: 208 mm (8
3
/
16
")
A4: 202 mm (7
15
/
16
")
Transmission time
*1
:
Approx. 4 s/page (ECM-MMR)
*2
Scanning density:
Fax resolution:
Horizontal: 8 pels/mm (203 pels/inch)
Vertical: 3.85 lines/mm (98 lines/inch)-in
standard resolution,
7.7 lines/mm (196 lines/inch)-in fine/photo
resolution,
15.4 lines/mm (392 lines/inch)-in super fine
resolution
Copy resolution:
Up to 600
× 600 dpi
Scanning resolution:
Up to 200
× 400 dpi (Optical)
Up to 9,600
× 9,600 dpi (Interpolated)
Photo resolution:
64-level
Scanner type:
Contact Image Sensor
Printer type:
Laser Printer
Data compression system:
Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
Modem speed:
33,600 / 31,200 / 28,800 / 26,400 / 24,000 /
21,600 / 19,200 / 16,800 / 14,400 / 12,000 /
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic
Fallback
Operating environment:
10
°C – 32.5 °C (50 °F – 90.5 °F), 20 % – 80 %
RH (Relative Humidity)
Dimensions:
Approx. height 370 mm
× width 430 mm × depth
480 mm (14
9
/
16
"
Ч 16 15
/
16
"
Ч 18 7
/
8
")
Mass (Weight):
Approx. 9.4 kg (20.2 lb.)
Power consumption:
Standby: Approx. 8 W
Transmission: Approx. 15 W
Reception: Approx. 290 W
Copy: Approx. 290 W
Maximum: Approx. 900 W (When the fuser lamp
turns on)
Power supply:
120 V AC, 60 Hz
Fax memory capacity:
2 MB in total
Approx. 150 pages of memory transmission
Approx. 170 pages of memory reception
(Based on the ITU-T No. 1 Test Chart in standard
resolution.)
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm – 800 nm
Emission duration: Continuous
Print speed:
Approx. 14 ppm (pages per minute)
Printing resolution:
600
× 600 dpi
*1 Transmission speed depends upon the
contents of the pages, resolution, telephone
line conditions and capability of the other
party’s machine.
*2 Transmission speed is based upon the ITU-T
No. 1 Test Chart. If the capability of the other
party’s machine is inferior to your unit, the
transmission time may be longer.
ITU-T No.1 Test Chart
Note:
L Design and specifications are subject to
change without notice.
L The pictures and illustrations in these
instructions may vary slightly from the actual
product.
FLM651-PFQX2292ZA-en.book Page 78 Monday, September 12, 2005 2:22 PM