6 receiving a fax automatically – auto answer on, 7 receiving a fax manually – auto answer off, Receiving a fax automatically – auto answer on – Panasonic KX-FLM651 User Manual
Page 37: Receiving a fax manually – auto answer off, 6 receiving a fax automatically – auto answer on, 7 receiving a fax manually – auto answer off, 1 activating fax only mode, 1 activating tel mode
4. Fax
35
4.6 Receiving a fax
automatically – Auto
answer ON
4.6.1 Activating FAX ONLY mode
1
Press {AUTO ANSWER} repeatedly to
display the following.
FAX ONLY MODE
3 RINGS
[±]
L
The display will show the ring setting in
FAX ONLY mode.
L
The {AUTO ANSWER} light is ON.
2
If you wish to change the ring setting, press
{A}
or {B} repeatedly to display the desired
setting, and press {SET}.
How faxes are received
When receiving calls, the unit will automatically
answer all calls and only receive fax documents.
If you have subscribed to a Distinctive
Ring service
See page 39.
4.7 Receiving a fax
manually – Auto answer
OFF
4.7.1 Activating TEL mode
Set the fax machine to TEL mode by pressing
{
AUTO ANSWER} repeatedly to display the
following.
TEL MODE
L
The {AUTO ANSWER} light is OFF.
How to receive phone calls and faxes
1. Lift the handset to answer the call.
2. When:
–
document reception is required,
–
a fax calling tone (slow beep) is heard, or
–
no sound is heard,
press {FAX START}.
CONNECTING...
3. Replace the handset.
L
The unit will start fax reception.
L
If you do not answer the call within 10
rings, the unit will temporarily switch to fax
reception. The other party can then send
a fax.
{
SET}
{A}{B}
{
FAX START}
{
STOP}
FLM651-PFQX2292ZA-en.book Page 35 Monday, September 12, 2005 2:22 PM