4 adjusting volume, Initial programming, 5 date and time – Panasonic KX-FLM651 User Manual
Page 23: Adjusting volume, Date and time, 4 adjusting volume, 5 date and time, Preparation 21

2. Preparation
21
For assistance, please visit http://www.panasonic.com/consumersupport
2.4 Adjusting volume
Ringer volume
While the unit is idle, press {A} or {B}.
L
If any documents are in the document
entrance, you cannot adjust the volume.
Confirm that there are no documents in the
entrance.
To turn the ringer OFF
1. Press {B} repeatedly to display “
RINGER
OFF= OK?”.
2. Press {SET}.
L
When a call is received, the unit will not
ring and will display “
INCOMING CALL”.
L
To turn the ringer back ON, press {A}.
Ringer pattern
L
You can select one of three ringer patterns
(feature #161 on page 53).
Handset receiver volume
While using the handset, press {A} or {B}.
Monitor volume
While using the monitor, press {A} or {B}.
Initial Programming
2.5 Date and time
You must set the date and time.
1
Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[( )]
2
Press {#}, then {1}{0}{1}.
SET DATE & TIME
PRESS SET
3
Press {SET}.
L
The cursor (
|
) will appear on the display.
M:
|
01/D:01/Y:05
TIME: 12:00AM
4
Enter the current month/date/year by
selecting 2 digits for each.
Example: August 10, 2005
Press {0}{8} {1}{0} {0}{5}.
M:08/D:10/Y:05
TIME:
|
12:00AM
5
Enter the current hour/minute by selecting 2
digits for each. Press {*} to select “
AM” or
“
PM”.
Example: 10:15PM (12 hour clock entry)
1. Press {1}{0} {1}{5}.
M:
|
08/D:10/Y:05
TIME: 10:15AM
2. Press {*} repeatedly to display “
PM”.
M:
|
08/D:10/Y:05
TIME: 10:15PM
6
Press {SET}.
SETUP ITEM [
]
7
Press {MENU} to exit.
{
SET}
{A}{B}
{
SET}
{
MENU}
{
<
}{
>
}
FLM651-PFQX2292ZA-en.book Page 21 Monday, September 12, 2005 2:22 PM