POLAR CS600 User Manual
Page 7
To adjust the data, use UP, DOWN and accept with OK. The values scroll faster if you press and hold
UP or DOWN.
1.
To activate your cycling computer, press OK twice. Once activated, it cannot be switched off!
2.
Welcome to Polar Cycling World!
is displayed. Press OK.
3.
Language
: Select
English
,
Deutsch
,
Español
,
Français
or
Italiano
. Press OK.
4.
Start with bike settings
is displayed. Press OK.
5.
Number of bikes: Select 1, 2 or 3 depending on how many bicycles you will be using. If you only
use one bicycle, settings for bikes 2 or 3 bikes can be entered later. For further information see
Bike Settings.
6.
Wheel
: Enter the wheel size
(mm)
for each of your bicycles. For further information, see Measuring
7.
Start with basic settings
is displayed. Press OK and adjust the following data:
8.
Time
: Select 1
2h
or
24h
. With
12h
, select
AM
or
PM
. Enter the local time.
9.
Date
: Enter current date; dd = day, mm = month, yy = year. If you use imperial units, set the date;
mm = month, dd = day, yy = year.
10.
Units
: Select metric
(kg/cm/km)
or imperial
(lb/ft/mi)
units.
11.
Weight
: Enter your weight. To change units, press and hold the LIGHT.
12.
Height
: Enter your height. In LB/FT format, first enter feet then inches.
13.
Birthday
: Enter your date of birth; dd=day, mm=month, yy=year
14.
Sex
: Select
Male
or
Female
.
15.
Settings OK?
is displayed. Select
Yes
or
No
. Select
Yes
to accept and save settings. The cycling
computer will display time of day. Select
No
if settings are incorrect and need to be changed.
Press STOP to return to the data you want to change.
Use the Polar ProTrainer 5 software to enter all basic settings.
Polar CS600 User Manual
7