beautypg.com

Frequently asked questions – POLAR CS600 User Manual

Page 52

background image

Marking on case back

Wash
splashes,
sweat,
raindrops
etc.

Bathing and
swimming

Skin diving
with
snorkel (no
air tanks)

SCUBA
diving
(with air
tanks)

Water resistant
characteristics

Water resistant

x

Splashes,
raindrops etc.

Water resistant 50m

x

x

Minimum for
bathing and
swimming*.

Water resistant 100m

x

x

x

For frequent use
in water but not
SCUBA diving.

*These characteristics also apply to Polar WearLink W.I.N.D. transmitters marked Water resistant 30m.

Frequently Asked Questions

What should I do if...

...the battery symbol and

Battery low

is displayed?

The low battery indicator is usually the first sign of an expired battery. However, in cold conditions the
low battery indicator may appear. The indicator will disappear as soon as you return to a normal
temperature. When the symbol appears, the cycling computer sounds and backlight are automatically
deactivated. For further information on changing the battery, see Care and Maintenance.

...I do not know where I am in the menu?

Press and hold STOP until the time of day is displayed.

...there are no reactions to any buttons?

Reset the cycling computer by pressing all the side buttons simultaneously for 2 seconds. After the
reset, press the red button,

Start with bike settings

is displayed. You can either accept the bike settings

with OK or change the bike settings. Then

Basic Settings

is displayed. Set the time and date, all the rest

of the settings are saved. For more information see Basic Settings and Measuring Wheel Size. If you do
not want to change the rest of the settings you can skip them by pressing and holding STOP. All the
exercise data is saved.

...the cycling computer does not measure the calories?

Burnt calories are calculated only when you are wearing the transmitter and all the basic settings are
done correctly. For more information see Basic Settings.

...another person with a cycling computer or a heart rate monitor is causing interference?

See Precautions.

...the heart rate reading becomes erratic, extremely high or shows nil (00)?

Make sure the cycling computer is no further than 40 m/131 ft from the transmitter.

Make sure the transmitter belt has not loosened during exercise.

Make sure the textile electrodes in the sports apparel fit snugly.

Make sure that the electrodes of the transmitter / sports apparel are moistened.

Make sure the transmitter / sports apparel is clean.

Make sure that there is no other heart rate transmitter within 40 m/131 ft.

Strong electromagnetic signals can cause erratic readings. For further information, see Precautions.

If the erratic heart rate reading continues despite moving away from the source of disturbance, slow
down your speed and check your pulse manually. If you feel it corresponds to the high reading on
the display, you may be experiencing cardiac arrhythmia. Most cases of arrhythmia are not serious,
but consult your doctor nevertheless.

A cardiac event may have altered your ECG waveform. In this case, consult your physician.

Polar CS600 User Manual

52