Automatic lap recording, Heart rate view, Sport zones – POLAR CS600 User Manual

Page 29: Bike settings, Wheel size, Autostart: on / off, Arrival time

The RR data recording function measures and records heartbeat intervals with one millisecond
resolution. This enables the analysis of heart rate variability (HRV) using the Polar ProTrainer 5
software. The RR data function consumes the memory of the cycling computer and when setting the
function, the remaining recording time is shown on the lower row of the display.

Automatic Lap Recording

Set the automatic lap recording

Select

Settings > Features > A.Lap > On > set the lap distance

The cycling computer will automatically record laps. Choose

Off

to deactivate.

Heart Rate View

Choose a format to view your heart rate

Select

Settings > Features > HR view > HR / HR% / HRR%

Sport Zones

Define Polar Sport Zones in the cycling computer

Select

Settings > Features > Sport zones > Sport zone low limit

Set the lower limit of sport zone 1 by pressing UP or DOWN. Then press OK. Set the lower limits of
each sport zone in the same way. When setting the lower limit, the upper limit of the previous zone is
set automatically.

Press and hold LIGHT to switch between sport zone views:

HR%

(percentage of maximum heart rate) or

BPM

(beats per minute) or

HRR%

(percentage of heart rate reserve).

You can change settings easily by using the Polar ProTrainer 5 software. For further information,
consult software help.

You can lock/unlock sport zone by pressing and holding the

LAP

button during your ride.

Bike Settings

Select

Settings > Bike

You can set three bike preferences for the cycling computer. Prepare the settings for the bikes and
when you start training, select bike 1, 2 or 3. Bike 1 is set as a default.

Select

Settings > Bike > Bike 1, Bike 2, Bike 3

Other

. Bike 2 and Bike 3 can be turned on or off. Select

Other

to deactivate speed, cadence and power sensors, and to measure heart rate, altitude, and

temperature data only.

Wheel Size

Select

Bike > Bike 1 > Wheel

Wheel size settings are a prerequisite for correct cycling information. For more information on
measuring the wheel size, see Measuring Wheel Size.

Autostart: On / Off

Select

Settings > Bike > Bike1 > Autostrt

The Autostart function starts or stops automatically the exercise recording when you start or stop
cycling. The Autostart function requires Polar Speed Sensor or Polar Speed Sensor W.I.N.D.

Arrival time

Select

Settings > Bike > Bike 1 > Arr. time

Polar CS600 User Manual