Speed: on / off, Cadence*: on / off, Power*: on / off – POLAR CS600 User Manual
Page 30: User settings
Set the distance you are going to ride, and the cycling computer will calculate and display the
estimated time of arrival based on cycling speed. Install the Polar Speed Sensor on your bike to
measure speed and distance. For further information on installing the speed sensor, consult Polar
Speed Sensor user manual.
•
Select by pressing OK
•
Select
On/Off
to set the feature on or off.
•
Select
Set dist.
to set the distance you are going to ride.
Speed: On / Off
Select
Settings > Bike > Bike 1 > Speed > On/Off
As default the speed is
On
for bike 1.
Select
On
and
Teach new sensor
is displayed. For further information on teaching the new sensor see
Select
Off
and the computer will select the Speed sensor that already has been taught. Next time you
will have to teach the speed sensor again.
Speed settings are either done manually or with the Polar ProTrainer 5 software.
Cadence*: On / Off
You can install an optional Polar Cadence Sensor to your bicycle.
Select
Settings > Bike > Bike 1 > Cadence > On/Off
Select
On
and
Teach new sensor
is displayed. For further information on teaching the new sensor see
Select
Off
to remove cadence from all the displays.
Power*: On / Off
You can install an optional Polar Power Output Sensor on your bicycle.
Select
Settings > Bike > Bike 1 > Power > On/Off
Select
On
and
Teach new sensor
is displayed. For further information on teaching the new sensor see
Teach New Power Output Sensor*.
Select
Off
to remove power from all displays.
Power settings: You need to enter the chain weight (g), chain length (cm/inch) and span length
(cm/inch) into the cycling computer to measure correct power information.
Select
Settings > Bike > Bike1, Bike 2 or Bike 3 > Power > Settings
and
> Set chain weight xxxx g > OK
> Set chain length xxx mm > OK
> Set span length xxx mm > OK
For further information on Power settings, consult the Power Output user manual.
Use Polar ProTrainer 5 software for Power settings.
*Optional sensor required.
User Settings
Enter accurate user information in the cycling computer to receive the correct feedback on your
performance.
Polar CS600 User Manual
30