Paxar Monarch 9433 - Manual (Page 54)

3-24 System Administrator’s Guide
Flow Control
Use this option to set the printer's flow control. Make sure the printer
settings match those at the host.
1. Select Flow Ctrl.
DTR Flow
RTS Flow
↵ c d
2. Make your selection: No Flow, DTR Flow, RTS Flow, XON/XOFF, or
Special. For example:
DTR Flow Ctrl
↵
3. Press A under ↵ to save the setting.
4. Press F until you return to the Setup menu.
If you change a setting, the new settings appear on the display.
For example:
New Selection
9600,N,8,1,No
Flow
Are you sure?
↵ X
5. Press A under ↵ to save the setting. Or, press A under X to exit
without saving the new setting.